ESC

Specification

• 1.1 Output: Continuous 18A, burst 50A.
  1.2 Input: 4-9 cell NiMH/NiCd or 2-3S LiPo. 
  1.3 BEC: 6V/1A (Linear mode built-in BEC).
  1.4 Resistance: 0.01 Ohm.
  1.5 Motor Supported: Sensorless Brushless Motor.
  1.6 Suitable Motor:  * Note #1
          With 4-6 cell NiMH/NiCd or 2S LiPo: On-Road≥12T,  Off-Road≥8T;
          With 6-9 cell NiMH/NiCd or 3S LiPo: On-Road≥18T,  Off-Road≥24T;
  1.7 Suitable Car: 1/18 on-road sport.
  1.8 Cooling Fan: Not included.
  1.9 Size: 31.5mm(L) * 27.5mm(W) * 15mm(H).
  1.10 Weight:  19g (Without wires)
  * Note #1: These listed T numbers are available for 2040 size brushless motor (Ø=24, L=40) 

Features

• 2.1   Compatible with sensorless brushless motors.
  2.2   Top quality components, high current endurance.
  2.3   Excellent start-up, acceleration and linearity features.
  2.4   Many programmable items. Suitable for various chassis, tires and racing tracks.
  2.5   Multiple protection features: Low voltage cut-off protection / Over-heating protection / Throttle signal loss protection.
  2.6   Internal timing can be changed easily to make the ESC suitable for various motors. 
  2.7   Easily programmable with LED program card (purchased separately) or LCD program box 

The options in italic font in the above table are the default settings of the ESC.
(* The programmable items and the default settings maybe changed in different firmware versions without prior notification.) 

Motor

Specifications:

• kV: 7800
  Motor Diameter: 20mm
  Motor Length: 30
  Shaft Diameter: 2mm
  Shaft Length: 10mm
  Weight: 46g

Features:

• Top quality motor:
  • Aluminum shell (case)
  • High quality magnets
  • Copper wires of high temperature endurance
  • Good quality bearings

Digital LED Program Card

This LED program Card is for programming HobbyWing brushless ESCs. Its friendly interface makes ESC programming easy and quick.
It’s compact, portable and very applicable for field use.
It works with the following HobbyWing products:

• Platinum series
• FlyFun V5 series of brushless aircraft ESCs.
• Skywalker V2 series and later version
• XeRun series (some XeRun ESCs, please take the instructions of relevant user manuals as standard.)
• EzRun series
• QuicRun series of brushless car ESCs.
• Quicrun 1080 & 880 brushed ESC
• SeaKing series of brushless boat ESCs.

Specifications
Size：88x58x14mm（LxWxH）
Weight：40g
Input Voltage: 4.8V—8.4V(a separate battery is needed for powering this program box when ESC has no built-in/external BEC)